We offer Brano rope winches in 2 load capacity variants of 0.5t and 1t.
Use:
For manual lifting and pulling of loads
- as a service hoist for assembly and maintenance work in technological devices of all kinds
- for loading cars or boats onto trailers
- for handling activities on small ships (tensioning sails, etc.)
- the possibility of use also in an environment with a risk of explosion - only applies to variants marked NEXP - marking of the "explosiveness" of the product - I M2; II 2G T5 (device group I, category M2; device group II, category 2G, temperature class T5)
Properties:
- simple lightweight construction
- easy operation
- anti-corrosion surface treatment by galvanic galvanization - for standard environments
- anti-corrosion surface treatment with "ZnNi" (Zinc + Nickel) galvanic plating - for a more demanding environment
- rope with hook for standard environment is galvanized
- we can offer a rope with a hook for a more corrosive environment in an all-stainless design
- consult the manufacturer for the use of the winch in a non-standard or extreme environment
- ready for mounting on the structure
- minimal maintenance requirements
We deliver in two versions: with rope or without rope.
| Type | Carrying capacity (t) | Main dimensions (mm) | Technical parameters | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | B | C | D | E | F* | G* | G1 | L | R | Rope (mm) | Stroke (m) | Transmission ratio | Control power on handle max. (N) | Mass winch with a rope (kg) | ||
| LN | 0,5t | 264 | 167 | 344 | 193 | 186 | 144 | 115 | 19 | 5 | 200 | Ø5 | 10 | 1:8 | 250 | 9,5 |
| 1t | 373 | 207 | 460 | 240 | 209 | 160 | 160 | 19 | 8 | 300 | Ø8 | 10 | 1:6 | 320 | 15,2 | |
| * spacing of holes for anchoring the rope winch Ø of anchor holes – LN/0.5t – 9mm, LN/1t – 11mm | ||||||||||||||||
User Manual