Innovation of the Brano Z210 hoist – the travel of the hoist is equipped with safety bumpers.
Use:
Manually operated mobile hoist Z220/0.5t – 10t Brano is intended for lifting, lowering and moving loads in the space of the crane track
- particularly suitable for use wherever the hoist is not intensively used
for occasional use - as a service hoist for assembly and maintenance work in technological devices of all kinds
in places without a power source - the possibility of use also in an environment with a risk of explosion (NEXP designation)
- for load capacities of 0.5t, 1t and 1.6t we can offer a stainless steel load chain and a stainless steel lower hook assembly
- to improve corrosion resistance, we can offer a control chain with hot-dip zinc coating (thickness approx. 50μm)
- on request, we can provide a 2D or 3D diagram of the product
Properties:
- simple construction, easy adaptation of the cat to the width of the crane track
- easy operation
- minimal maintenance requirements
The mobile hoist Z220/0.5-10t is intended for traveling along a horizontal crane track.
MIt can drive both on profiles with an inclined flange (rolled " I " profiles) and on profiles with a straight flange (" IPE , HEA , HEB , HEM " type profiles)
The Z220/0.5-10t mobile hoist is normally produced with a basic lift of 3m. Choice of lift from 3m to 12m.
New: addition of type Z220-C - extension of use for a larger range of beam flange widths.
| Type | Carrying capacity (t) | Main dimensions (mm) | I – beam (I, IPE, HEA, HEB,HEM) | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| a | d | d1 | D | emin | Lmin | r | k | b | R | ||
| Z220-A | 0,5 t inappropriately for the profile HEM | 245 | 30 | 55 | 109 | 18,5 | 290 | 87 | 95 | 58-113 | 1000 |
| Z220-B | 58-220 | ||||||||||
| Z220-C | 125-300 | ||||||||||
| Z220-A | 1 t inappropriately for the profile HEM | 245 | 36 | 55 | 109 | 23,5 | 340 | 87 | 95 | 58-113 | 1000 |
| Z220-B | 58-220 | ||||||||||
| Z220-C | 125-300 | ||||||||||
| Z220-A | 1,6 t | 350 | 43 | 100 | 230 | 29,5 | 457 | 140 | 136 | 58-113 | 1700 |
| Z220-B | 58-226 | ||||||||||
| Z220-C | 137-300 | ||||||||||
| Z220-A | 3,2 t | 435 | 50 | 133 | 280 | 35,5 | 575 | 170 | 162 | 82-125 | 2500 |
| Z220-B | 82-226 | ||||||||||
| Z220-C | 160-300 | ||||||||||
| Z220-A | 5 t | 505 | 56 | 148 | 345 | 39,5 | 660 | 218 | 227 | 90-137 | 2800 |
| Z220-B | 90-226 | ||||||||||
| Z220C | 170-300 | ||||||||||
| Z220 | 7,5 t | 685 | 56 | 196 | 345 | 43 | 875 | 300 | 222 | 125-185 (I) | 5000 |
| Z220-C | 146-300 | ||||||||||
| Z220 | 10 t | 765 | 63 | 228 | 428 | 47 | 920 | 328 | 256 | 125-185 (I) | 9000 |
b – beam flange width range
R – minimum radius of curvature of the taxiway
The dimensions of the drawing L , m , n are given in the table of dimensions of the single-girder jack Z420.
| Type | Load capacity (t) | Number of supporting strands | Load chain | Control force for travel * * (N) | Control force for stroke (N) | Lifting speed * (m/min) | Travel speed * /strong> (m/min) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|
| Z220-A | 0,5 | 1 | Ø5×15 | 250 | 300 | 1,1 | 4,8 | 16,9 |
| Z220-B | 18,6 | |||||||
| Z220-C | 19,6 | |||||||
| Z220-A | 1 | 1 | Ø7×21 | 250 | 350 | 0,7 | 4,8 | 22,4 |
| Z220-B | 24,1 | |||||||
| Z220-C | 25,1 | |||||||
| Z220-A | 1,6 | 1 | Ø9×27 | 150 | 320 | 0,36 | 2,25 | 44,4 |
| Z220-B | 46,2 | |||||||
| Z220-C | 47,4 | |||||||
| Z220-A | 3,2 | 1 | Ø11×31 | 280 | 400 | 0,29 | 2,3 | 73,1 |
| Z220-B | 74,9 | |||||||
| Z220-C | 76,6 | |||||||
| Z220-A | 5 | 2 | Ø11×31 | 350 | 400 | 0,15 | 1,8 | 105,5 |
| Z220-B | 107,5 | |||||||
| Z220-C | 110,8 | |||||||
| Z220 | 7,5 | 2 | Ø11×31 | 500 | 480 | 0,15 | 5,97 | 207,2 |
| Z220-C | 211,2 | |||||||
| Z220 | 10 | 3 | Ø11×31 | 500 | 390 | 0,1 | 7,3 | 264,5 |
| Z220-C | 272 | |||||||
| * calculated assuming unwinding of 30 m of hand chain per minute. Hand chain for all load capacities Ø 4×20 ** for hoists with a load capacity of 3.2-10t, it is necessary to ensure operation by two people when loading loads close to the rated load capacity | ||||||||
User Manual