Innovation of the Z210 type – the travel of the hoist is equipped with safety bumpers.
Use:
As a classic hand-operated crane for lifting and moving loads in the space of the crane track
as a service hoist for assembly and maintenance work in technological facilities of all kinds - for lifting large loads
suitable for places without a source of electricity
the possibility of use also in an environment with a risk of explosion (NEXP designation)
Properties:
simple construction, easy adaptation of the cat to the width of the crane track
easy operation
minimal maintenance requirements
It differs from the lower capacities in that it consists of two linked carriages and two hoists.
Z220/15t – 20t is produced with a basic lift of 5m. A longer stroke must be specified on the order.
The width of the beam b can be changed at the customer's request.
We recommend only for driving on profiles with a straight flange (" HEB " type profiles).
However, the travel wheels of the mobile hoist allow travel even on profiles with an inclined flange.
| Type | Carrying capacity (t) | Main dimensions (mm) | |||||||
|---|---|---|---|---|---|---|---|---|---|
| a | d | d1 | D | r | f | emin | Lmin | ||
| Z220 | 15 | 1290 | 71 | 196 | 345 | 300 | 270 | 50 | 780 |
| 20 | 1500 | 80 | 237 | 428 | 328 | 380 | 62 | 720 | |
Mobile hoist Z220/15t – 20t – diagram – schéma b – beam flange width – specified by the user when ordering the hoist
| Type | Carrying capacity (t) | Number bearing springs | Load chain | Control power for drive (N) | Control power for stroke (N) | Lifting speed*(m/min) | Driving speed*(m/min) | Stroke max.**(m) | Mass without chain (kg) | Growth weight on a 1m stroke (kg) |
|---|---|---|---|---|---|---|---|---|---|---|
| Z220 | 15 | 4 | Ø11×31 | 500 | 480 | 0,15 | 2,05 | 12 | 285 | 13 |
| 20 | 6 | 400 | 0,1 | 2,51 | 8 | 345 | 19,2 | |||
| * Calculated assuming unwinding of 30m of hand chain per minute on each hoist. Hand chain Ø 4×20 ** Lift according to order. Strokes greater than those listed in the table must be consulted with the manufacturer. | ||||||||||
User Manual