Use:
They are widely used especially in the construction industry, in mining and everywhere where it is necessary to handle loads.
- for lifting and dragging loads
- for tensioning fences, extrication work, pulling out tree stands
- as a lifting device for mine suspension tracks
- for assembly and handling work of various kinds
- suitable for use in heavy operations - mines, smelters, etc.
Properties:
- simple robust design, portable
- resistant to rough handling (mud, dust)
- equipped with overload protection
- simple operation
- minimální nároky na údržbu
- minimal maintenance requirements the possibility of use also in an environment with a risk of explosion (NEXP designation)
The jack is normally produced with a basic lift of 1.5m. Choice of lift from 1.5m to 6m. Other length after consultation with the manufacturer.
Type | Carrying capacity | Number | Chain | Control | Lifting * | Main dimensions (mm) | Mass | Growth | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
a | d | e | l | L | r | ||||||||
RZC | 0,8 | 1 | Ø 5 x 15 | 400 | 1,27 | 145 | 36 | 23,5 | 145 | 327 | 560 | 8,4 | 0,55 |
1,6 | 1 | Ø 9 x 27 | 370 | 0,52 | 165 | 43 | 29,5 | 160 | 380 | 560 | 16 | 1,84 | |
3,2 | 1 | Ø 11 x 31 | 400 | 0,37 | 173 | 50 | 35,5 | 223 | 417 | 560 | 21 | 2,73 | |
5 | 2 | Ø 11 x 31 | 300 | 0,18 | 173 | 56 | 42 | 242 | 630 | 560 | 34 | 5,46 | |
6,3 | 2 | Ø 11 x 31 | 400 | 0,18 | 173 | 63 | 48 | 265 | 650 | 560 | 40 | 5,46 | |
7,5 | 2 | Ø 11 x 31 | 480 | 0,18 | 173 | 56 | 43 | 386 | 880 | 560 | 53 | 5,46 | |
* calculated assuming 48 hand lever swings per minute. | |||||||||||||
User Manual