Use:
They are widely used in lifting and handling loads.
- for lifting and dragging loads
- for tension work
- for assembly and handling work of various kinds
- particularly suitable for "lighter" workshop use - precise feed
- the possibility of use also in an environment with a risk of explosion (NEXP designation)
Properties:
- simple light construction, portable
- minimum control forces
- simple operation
- minimal maintenance requirements
The jack is normally produced with a basic lift of 1.5m. Choice of lift from 1.5m to 6m. Other length after consultation with the manufacturer.
Production of Z310 products has been discontinued. The last remaining stock is now being sold off:
In stock:
Z310/0.5t = 12 pcs
Z310/1t = 19 pcs
Z310/3.2t = 1 pc.
Z310/5t = 2 pcs.
Spare parts will continue to be supplied even after production has been discontinued.
Type | Carrying capacity | Number | Load chain | Control | Lifting * | Main dimensions (mm) | Mass | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
a | d | e | l | L | r | |||||||
Z310 | 0,5 | 1 | Ø 5 x 15 | 120 | 0,3 | 166 | 30 | 18,5 | 120 | 235 | 290 | 7,6 |
Z310-1 | 1 | 1 | Ø 7 x 21 | 180 | 0,33 | 190 | 36 | 23,5 | 135 | 300 | 380 | 10,5 |
Z310 | 1,6 | 1 | Ø 9 x 27 | 300 | 0,4 | 187 | 43 | 29,5 | 175 | 420 | 380 | 14,4 |
| 3,2 | 2 | Ø 9 x 27 | 350 | 0,2 | 187 | 50 | 35,5 | 220 | 500 | 380 | 22,5 | |
| 5 | 3 | Ø 9 x 27 | 400 | 0,13 | 187 | 56 | 39,5 | 230 | 700 | 380 | 33 | |
| * calculated assuming 48 hand lever swings per minute. | |||||||||||
User Manual